ASC035 Adjustable 135° Glass-to-Glass Shower Door Hinge – Square Corner
The ASC035 is a standard-duty adjustable 135° glass-to-glass shower door hinge for frameless shower enclosures. It connects a moving glass door to a fixed glass panel in a 135° configuration.
Its square-corner profile provides a clean, straight-edged hinge design. Made from forged solid brass, ASC035 is suitable for 10–12 mm tempered glass.
Adjustable Closing Position
The ASC035 allows the door closing position to be adjusted after installation.
Once the door is installed and properly supported, loosen the Allen set screws and move the door to the required closing position. Tighten the set screws to secure the setting. The hinge will then self-center as the door returns to within approximately 15° of the selected closed position.
The adjustable mechanism provides approximately ±15° of adjustment, helping accommodate installation tolerances and achieve correct door alignment.
135° Glass-to-Glass Application
ASC035 is designed for frameless shower enclosures where the moving door and fixed glass panel meet at a 135° angle.
Before glass fabrication, confirm the enclosure layout, door weight, hinge quantity and glass cut-out requirements. Use suitable tempered safety glass and follow the applicable technical drawing during installation.
Product Specifications
- Model: ASC035
- Application: Glass-to-Glass
- Mounting Angle: 135°
- Profile: Square Corner
- Duty: Standard Duty
- Material: Forged Solid Brass
- Glass Thickness: 10–12 mm Tempered Glass
- Size: 3.54″ W × 2.17″ H
- Adjustment Range: Approximately ±15°
- Self-Centering: Within 15° of the Selected Closed Position
- Internal Components: Stainless Steel Hardened Coil Springs and Pin
- Screw Cover: Snap-On Cover Available
- Load Reference: 2 Hinges / 90 lb; 3 Hinges / 130 lb
- Cycle Test: At Least 100,000 Opening and Closing Cycles
- Finishes: Polished Chrome, Brushed Nickel, Matte Black and Satin Brass
- Accessories: Gaskets, Stainless Steel Mounting Screws and Allen Wrench
Selecting ASC035
Choose ASC035 when a frameless shower enclosure requires an adjustable 135° glass-to-glass hinge with a square-corner exterior profile.
For the same adjustable 135° glass-to-glass configuration with a beveled-corner profile, see the ASH235 Adjustable 135° Glass-to-Glass Shower Hinge – Beveled Corner.
Browse our Adjustable Shower Door Hinges range for other adjustable mounting angles and hinge designs.
